i have been looking around for parts suppliers and i thought it would be a good idea for everyone to get together and post up any manufactures/suppliers they can think of that currently sells EBR parts
-Hotbodies racing= race body work
-R@G= frame sliders, grills for coolers, small tidbits
-5-0dro= swing arm and fork protection
-Driven racing= spools
-Dean Adams= EBR exhaust/ special tools/ Buell exhaust
-APH= exhaust
-IDSPD= ECM (Dean Adams-APH-HMF-Muffler delete-programmable)
-STITCH WILSON =seats stitch@customcycleseats.com
-Diesel moto= rotors
-Vortex= aluminum sprockets part #Vortex-821-43(43 tooth) and pegs
-Amsoil= you know why
-HMF= exhaust
-EBC= brake pads
-HIFLO= oil filters
-Knight Design= lower foot pegs
-AF1= store front for parts
-Bestem USA= carbon body work
-ABM=Clutch levers and brake levers
-GB Racing= crash protection for engine cases
-Motion Pro= throttle set up and cables
-Wilbers= shocks
-Showa= shocks
-PowerBronze= seat cowl, tire hugger
-Twisted Design= tidy tail kit
-ASV= levers
-quickshifter (no manufacture)= FUN
-T-Rex= frame sliders/ case protection
-JT Sprocket=JT Sprockets JTR1490.43 - steel
-wave rotor=BL02FID
-Ohlins- steering damper(model#SD000) bushing kit# a14010200ux0631
-K&N= oil filter part # KN-564
-Screensforbikes.com= 1190rx wind screens tall and short.
-keyless gas cap= post 38 on this thread for link (EBRRider)
-Updated chain slider= part #G0012.1B7A
-Barnett= clutch springs frictions and steels... look up Buell 1125 parts
-NCCR= online store front for parts. Has OEM and aftermarket parts
-Spark plug= NGK Spark Plug CR9EKB
-metal mesh oil filter=http://kandpengineering.com/product-catalog/s27/
- Supersprox= sprocket kits
-BuellTooth= quick shifter and dongle
-St Paul harley= random parts EBR and Buell
- CRG - RC2 Brake and Clutch levers for 2005 zx6r Part # 2RN-511-T-B
- Techspec - Tank Pads
- Liquid Performance eBay page - LAP's online discount part sales
- Öhlins - BU-888 is the 1125/RS rear shock, a drop-in part to the 1190RX/SX, a note though: these were all built in 2011 or earlier. If you purchase one, you'll have to have it serviced/rebuilt before you fit it to your bike or the seals will fail very quickly.
- Woodcraft - replacement/upgraded clip ons, replacement solid foot pegs, hand guards
- Shorai - Makers of the battery, battery cable, battery charger
- McMaster-Carr for Washers and O-Rings
- M18 Oil Drain Plug LH Washer - Equivalent to EBCF0092.1B6 - https://www.mcmaster.com/#97725a860/=1bnm6de
- M12 Oil Drain Plug RH Washer - Equivalent to EBCF0091.1B6 - https://www.mcmaster.com/#97725a250/=1bnm6vb
- Oil Filter Cover O-Ring - Equivalent to EBCF0003.1B6 - https://www.mcmaster.com/#9452k147/=1bnm7hx
gdisaac07 hooked this list up... i will stay in touch with him for links and such.. thanks bud for the clean up
- OEM Parts Supply
EBR Parts Supply - http://www.erikbuellracing.net/store/
- Updated chain slider (Part # G0012.1B7A)
LAP eBay page, Liquid Performance - https://www.ebay.com/sch/liquid_performance/
Aftermarket Dealers
AF1 (Our Forum Sponsor) -
NCCR (Official European EBR parts supplier, plus other aftermarket parts) -
St. Paul Harley Davidson - https://sphdonline.com/
Bodywork
Bestem USA
- Carbon fiber replacement parts -
Hotbodies Racing
- Full race fiberglass bodywork - https://www.hotbodiesracing.com/prod...race-bodywork/
PowerBronze
- Seat cowl and tire hugger -
Screensforbikes.com
- 1190RX windscreen, short and tall -
Slingshot Racing
- Keyless Billet Gas Cap - https://www.slingshotracing.net/cata...cap-p-868.html
Twisted Designs
- Tail Tidy Kit -
Seat
Stitch Wilson
- Custom seats - stitch@customcycleseats.com
Rider InterfaceABM
- Clutch Lever (Part # ) -
- Brake Lever (Part # ) -
ASV
- Clutch Lever (Part # ) -
- Brake Lever (Part # ) -
CRG
- Clutch Lever (RC2 for 2008 Kawasaki ZX-14, Part # , Shorty and other colors available too) -
- Brake Lever (RC2 for 2005 Kawasaki ZX-6R, Part # 2RN-511-T-B, Shorty and other colors available too) -
Knight Design
- Pegs
Motion Pro
- Adjustable throttle (Rev 2.1 Throttle tube, Part # ) -
Vortex
- Pegs -
Woodcraft
- Clip ons/bars (Part # ) -
- Solid foot pegs (Part # ) -
- Hand guards(Part # ) -
Protection
5-0Dro
- Swingarm and fork protection -
GB Racing
- Engine Case Protection -
R&G
- Frame sliders, cooler grills, assorted tidbits -
T-Rex
- Frame sliders, engine sliders, axle slider
Techspec
- Tank Pads (Part # ) -
Exhaust
APH
- Exhaust -
Dean Adams
- Round can or oval can exhaust, including ECU (either the one with the map exclusively for the type you buy, or a tunable ECU) -
- Various other tools -
HMF
- Exhaust -
Engine
Barnett
- Clutch springs (Part # , required if you're using a new exhausting and putting down more power than stock) -
- Clutch packs (Part # , this is the 1125 carbon fiber clutch pack) -
L.A. Sleeve
- Upgraded cylinder sleeves
NGK
- Spark Plug (Part # CR9EKB) -
Electronics
BUELLTooth
- Quickshifter, regular shift pattern -
- Quickshifter, GP shift pattern -
IDS
- Original designer of the ECU, sells ECU's with other tunes, plus a user-tunable one -
Shorai
- OEM Lithium Battery (Part # LFX21A7-BS17) -
- Battery Charger (Part # SHO-BMS01) -
- Battery Cable (Part # ) -
Woodcraft
- Ignition bypass (Part # ) -
Sprockets
JT Sprocket
- Steel, 43 tooth, Part # JTR1490.43 -
- Steel, 44 tooth, Part # JTR1490.44 -
Supersprox
- Steel/Aluminum engineered sprockets -
Vortex
- Aluminum, 43 tooth, Part # Vortex-821-43 -
- Aluminum, 44 tooth, Part # Vortex-821-44 -
Suspension
Öhlins
- Front Fork Cartridge Kit (Call Seacoast Sport Cycle for NIX30 kit, installed for $1,750 + Shipping) -
- Rear Shock (Part # BU-888 is the 1125/RS rear shock, a drop-in part to the 1190RX/SX. A note though: these were all built in 2011 or earlier. If you purchase one, you'll have to have it serviced/rebuilt before you fit it to your bike or the seals may fail very quickly) -
- Steering Damper (Part # SD000, requires bushing kit Part # A14010200UX0631) -
Showa
- Stock Big Piston Forks and Shock -
- Race Shock -
Wilbers
- Race Shock -
Brakes
Diesel Moto
- Front Rotor -
EBC
- Brake Pads -
SBS
- Dual Sinter Front Brake Pads (Part # 856DS) -
Wave Rotor
- Front Rotor, Part # BL02FID
Fluids and Filters
YOU MUST USE 10W-40 SYNTHETIC ENGINE OIL IF YOU PLAN ON RIDING AT ANY TIME WHEN IT IS LESS THAN 40 DEGREES FAHRENHEIT. OTHERWISE, USE 20W-50 SYNTHETIC.
AMSOIL (EBR recommends that you use AMSOIL)
- 10W-40 Oil (Part # MCF+QT-EA) -
- 20W-50 Oil (Part # MCVQT-EA) -
HIFLO
- Oil Filter (Part # ) -
K&N
- Oil Filter (Part # KN-564) -
K&P Engineering
- Metal mesh oil filter (Part # ) - http://kandpengineering.com/product-catalog/s27/
McMaster-Carr
- M18 Oil Drain Plug LH Washer - Equivalent to EBCF0092.1B6 - https://www.mcmaster.com/#97725a860/=1bnm6de
- M12 Oil Drain Plug RH Washer - Equivalent to EBCF0091.1B6 - https://www.mcmaster.com/#97725a250/=1bnm6vb
- Oil Filter Cover O-Ring - Equivalent to EBCF0003.1B6 - https://www.mcmaster.com/#9452k147/=1bnm7hx
Mobil 1
- 10W-40 Oil -
- 20W-50 Oil -
Royal Purple
- 10W-40 Oil -
- 20W-50 Oil -
Spools/Stands/Restraints
Driven Racing
- Spools -
Pit Bull
- Spools (6mm, Delrin only) -
- Rear pit stand (Wide stand) -
- Front pit headlift stand (Pin #1) -
- Trailer Restraint System (Part # ) -
i will try to keep the list up to date
please help out with it if you can thanks....