Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: My experience with the new Buell

  1. #21
    EBRforum Newb
    Join Date
    Jan 2024
    Location
    Colorado
    Posts
    5
    I bought a 2022 with 4 miles on it... you don't want to know how little I paid..!
    'Ranger, remember that you have about 600 miles of break in before you get to put the spurs to your new winged horse.
    And BEWARE - if you are getting a decent lean angle in a corner and at 'low' rpm you need a very steady throttle hand (all my bikes have 1/4 throttles, so I am used to it).
    The HH will do EXACTLY what you ask of it, and that means going off-line if your throttle hand tell the bike to go there.
    All in all, even under break in you'll be pleased with how light the steering feels and the engine pull.
    I set my clutch/brake lever adjusters to the extreme soft side (5 & 4) - lever pull is still stiff, but very livable - only a Terminator can pull the levers if they're in position #1..!

  2. #22
    EBRforum Newb
    Join Date
    Jan 2024
    Location
    Colorado
    Posts
    5
    Ranger, are you still alive? If not God speed to you - see you on the race track in the sky.

Similar Threads

  1. Bestem carbon - what was your experience?
    By jdubxb in forum 1190RX
    Replies: 8
    Last Post: 04-18-2019, 02:25 AM
  2. Dyno-Boost chip thoughts/experience?
    By GABuellDawg in forum EBR News and Discussion
    Replies: 10
    Last Post: 12-19-2017, 12:08 PM
  3. Another positive experience with EBR parts / EBR tech
    By rb21 in forum EBR News and Discussion
    Replies: 1
    Last Post: 12-14-2017, 10:05 AM
  4. Replies: 3
    Last Post: 09-04-2017, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •