What do you mean by "plunger insert"? The actual master cylinder piston? The ZX-14 levers come complete.Originally Posted by TerryS1980
What do you mean by "plunger insert"? The actual master cylinder piston? The ZX-14 levers come complete.
The ASV brake lever comes with 2-3 different pieces that hit the brake light switch and the one labeled ZX636 is the one used on the EBR.
Last edited by TerryS1980; 09-08-2017 at 12:30 PM.
Cooter , Here is what comes with the levers from Revzilla,
Attachment 1729
Terry, thanks for the link, I wasn't sure if all these worked, or if there were known fitment issues, especially for the brake lever.
2003 XB9R - 27,xxx miles, NRHS 1050 Kit, XB12 Primary
2015 1190SX - TailChop, IDS ECM, Finish Tips, Clubmans.
www.redlinesuperbike.com
Just a heads up from one of the aftermarket ones I bought.
Didn't come with any different plunger barrels, was just an aftermarket replacement. Wasn't quite right as when installed the brake was always activated. Pulled it off and returned it.
The ASV levers are probably better quality and correct fit.
A lot of the ebay levers will require a file or Dremel to get them to fit just right. That is why they are so cheap.
http://m.ebay.com/itm/Black-CNC-Shor...%257Ciid%253A8
I ended up ordering these. I will update once received/installed. If anything, I'm close to Detroit, there are plenty of Zx14 guys here that somehow always need cheap levers..
2003 XB9R - 27,xxx miles, NRHS 1050 Kit, XB12 Primary
2015 1190SX - TailChop, IDS ECM, Finish Tips, Clubmans.
www.redlinesuperbike.com
I'd stick with the ASV. I have them & they are an exact fit. I'd go with them because they offer the correct barrel for each model. As with ebay you get what you pay for on this part.
I have learned the hard way , Ya get what ya pay for . Just make sure on the brake once released it releases all the way.
This sounds all so familiar.....
Thanks for the detail guys:)
Posting Permissions
Reply With Quote