Results 1 to 5 of 5

Thread: Tankbags that work on the RX ?

  1. #1
    EBRforum Newb
    Join Date
    Sep 2017
    Location
    USA
    Posts
    5

    Tankbags that work on the RX ?

    Has anyone had success with tank bags on the RX ? I tried several at the local Cycle Gear, but they were all either too wide, too tall or both - they were all CG's own brands, Sedici and Bilt, so not that surprising. Has anyone tried one of the Cortech Super 2.0 bags - they look like they might work ?

  2. #2
    EBRforum Newb
    Join Date
    Mar 2016
    Location
    Kansas
    Posts
    6
    I run a Cortech strap type

  3. #3
    EBRforum Expert Cooter's Avatar
    Join Date
    Apr 2017
    Location
    In your basement
    Posts
    513
    I run a strap type with the front strap around the steering neck it didn't hold as solid as I liked, so I ran the strap under the airbag cover (over the actual airbox) and it's really solid now!

  4. #4
    EBRforum Newb
    Join Date
    Mar 2016
    Location
    Kansas
    Posts
    6
    I cut the straps and use the screws on the front of the air box then drilled a hole and used a bolt for the back under the seat

  5. #5
    EBRforum Junkie
    Join Date
    Jan 2015
    Location
    Jacksonville, FL
    Posts
    290
    I use the OGIO mini tank bag. It has four arms that have magnets on them. I cut off the two side pieces, removed the magnets and mounted them to the inside of the airbox, aligned with where the top and bottom magnets of the tank bag would be. Now the bag just sits on the tank with the magnets, and I throw the supplied safety loop around the handlebar as added security just in case I happen to knock it off the magnets.

Similar Threads

  1. Dang Quickshifter STILL doesn't work
    By Cooter in forum 1190RX
    Replies: 10
    Last Post: 05-27-2018, 11:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •