Has anyone lost an exhaust tip? Should I slot the pipe so the clamp squeezes the tip better? Does anyone have a couple hanging around to purchase that they don't need?
Mine were powder coated red so I'll need both. If not I guess I'll just go to a muffler shop to have a couple made.
Last edited by Kid Thunder; 05-11-2018 at 12:37 PM.
Your stock muffler outlets are slotted for that reason.
FYI, 2.25" tubing fits really well on the OD of those outlets and stock clamps still work. I slotted mine.
IMG_0625 by Cooter!, on Flickr
IMG_0626 by Cooter!, on Flickr
Or just go Basuko!!!
IMG_0623 by Cooter!, on Flickr
IMG_0622 by Cooter!, on Flickr
Wow! I could use those to knock people off sidewalks!! Where did you get those shorts one or did u make them?
I did want to make them a little longer cause I lowered the pegs 2" & the old foot gets warm!!!
Last edited by Kid Thunder; 05-11-2018 at 01:49 PM.
I had a 304 stainless 2.25" 180* bend in the pile at the shop (they are about $45) I cut it where I liked with a bandsaw, but you can be careful with a deathwheel if you mark it well.
Theres plenty of length on the run of the tube for however long you want them. Don't forget to slot them and crank the T-clamps on hard!
And FYI the Bazuko pipes are perfect for blowing up skirts.
Allegedly.
Yeah right! Sounds like it's from the voice of experience!!! Lol
Thanks
If you don't plan on using the OEM secondary muffler you can cut them from that and have a pair of black tips.
Good idea! Never thought of that.
Posting Permissions
Reply With Quote