It is a great sprocket, don't get me wrong. light & strong. Been running them on my 03 Tuono for years. But the price for the EBR one is high.
It is a great sprocket, don't get me wrong. light & strong. Been running them on my 03 Tuono for years. But the price for the EBR one is high.
Update on front sprocket from Supersprox, posted to the EBR 1190 Owners Group on Facebook by Dallas Beranek:
if you're on FB, post up and let him know if you're interested.Sooooooo great news everyone..... I've been in contact with supersprox in regards to our front and rear sprocket problems. They've already made a file and part number for our rear sprockets in any tooth you want (41-47) in their stealth model that is an aluminum center and steel teeth hybrid thats is decently priced for the quality and longevity of the product. So now here's the reason I'm making a second post about this....... They've agreed to making a replacement for our front sprocket that will have a replaceable "consumable" sprocket that bolts to a machined piece that replaces our unit. The only catch is that we will have to do a group buy of 50 units to start to make the necessary tooling and machining processes. This is a feeler post to see if we have 50 people interested enough and then they will be giving me a price soon. I told him that if they were priced close to $200 and replacement sprockets $40-$50 that I think it shouldn't be a problem.
No facebook but put one down for me if it comes down to it.
Can we change the info for the Ohlins steering damper, specifically the bushing kit. Instead of the a14010200ux0631 number, can we put “Oilless Bearing Sleeves Composite Bushing 6mm x 8mm x 8mm” instead?
It's already in a rod end. Any 6mm to 8mm sleeve material will do. Aluminum is fine.
I see you list Buelltooth as a dongle for EBR. Isn't the baud rate different? Does the diagnostic function and ECM parameters work? I don't believe there's any tuning options (yet).
Last edited by Cooter; 12-18-2017 at 04:04 PM.
NGK CR9EIX Iridium. Got them on line for $1 more than standard.
They only have quick shifters for EBRs to my knowledge. There are no aftermarket tuning options for EBRs. The only option is an IDS programmable ECM, sold through IDS or EBR.
"Love is the never ending act of forgiveness" -Peter Ustinov
2017 EBR 1190SX
2000 Buell M2
1995 Buell S2 (x2)
Not sure what you are answering but Buelltooth sells one as well as NCCR out of Sweden. The Buelltooth is cheapest & looks good. I have one but haven't installed it yet.
Things to add to the list:
- CRG - RC2 Clutch lever for 2008 Kawasaki ZX14
- EDIT: RC2 Brake lever for 2005 Kawasaki ZX-6R
- Techspec - Tank Pads
- Liquid Performance eBay page - LAP's online discount part sales
- Öhlins - BU-888 is the 1125/RS rear shock, a drop-in part to the 1190RX/SX, a note though: these were all built in 2011 or earlier. If you purchase one, you'll have to have it serviced/rebuilt before you fit it to your bike or the seals will fail very quickly.
- Woodcraft - replacement/upgraded clip ons, replacement solid foot pegs, hand guards
- Shorai - Makers of the battery, battery cable, battery charger
- McMaster-Carr for Washers and O-Rings
- M18 Oil Drain Plug LH Washer - Equivalent to EBCF0092.1B6 - https://www.mcmaster.com/#97725a860/=1bnm6de
- M12 Oil Drain Plug RH Washer - Equivalent to EBCF0091.1B6 - https://www.mcmaster.com/#97725a250/=1bnm6vb
- Oil Filter Cover O-Ring - Equivalent to EBCF0003.1B6 - https://www.mcmaster.com/#9452k147/=1bnm7hx
Last edited by gdisaac07; 03-24-2018 at 06:07 PM. Reason: Changed brake lever part equivalency