Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Front and Rear Stands

  1. #1
    EBRforum Newb
    Join Date
    Feb 2017
    Location
    US
    Posts
    14

    Front and Rear Stands

    New here, just signed the paperwork for #194 but it is getting a white body swap before being delivered. I'm very excited to get it on the road, and eventually track, but since I just got hit with another winter storm it may be a while.

    In the meantime, I will be storing the bike in my garage and would like to keep the tires off the ground in case it is a month or 2 before I can get on the road. I searched the forum and found recommendation for the pitbull front and rear stands but I can't seem to find any info on the 1190rx's width. I have been currently using a harbor freight rear stand (http://www.harborfreight.com/low-pro...and-99701.html) with a CycleGear trackside front stand (https://www.cyclegear.com/accessorie...-paddock-stand).

    Does anyone have a similar setup or know if these will work? From what I understand, the rear is a little wider than other bikes so I'm thinking I may need to at least get a new rear stand.

  2. #2
    EBRforum Junkie
    Join Date
    Jul 2015
    Location
    on a curvey road, by a drag strip
    Posts
    472
    Pitbull's rear stand made for Buell 1125 will be what your looking for.

  3. #3
    EBRforum Junkie
    Join Date
    Jan 2015
    Location
    Jacksonville, FL
    Posts
    299
    This is the one you want for the rear:
    http://www.pit-bull.com/product/F0083A-000.html

    ...and for the front:
    http://www.pit-bull.com/product/F0100-000.html

    I don't remember which pin they use for the front stand, but if you were to call Pit-Bull, their customer service is fantastic. I've been very happy with mine.

    (And congrats on the white - it's a great looking color)

  4. #4
    EBRforum Junkie
    Join Date
    Apr 2014
    Location
    RI
    Posts
    444
    17mm front pin

  5. #5
    EBRforum Newb
    Join Date
    Feb 2017
    Location
    US
    Posts
    14
    Great, just the info I needed. Thank you all for the fast replies, very excited to be joining this community.

  6. #6
    EBRforum Novice TerryS1980's Avatar
    Join Date
    Oct 2012
    Location
    South Louisiana
    Posts
    129
    Lots of people using these including myself..
    https://www.amazon.com/Venom-Motorcy...ont+rear+buell

  7. #7
    EBRforum Newb
    Join Date
    Feb 2017
    Location
    US
    Posts
    14
    For anyone still following this, I did order the pitbull front but on a hunch held off on the rear mount. CycleGear had a paddock stand sale recently so I was able to pick one up and stretch it enough for stable use on the RX. Took about 5 minutes, a hydraulic jack and a 2x4. Thanks again everyone.

    Edit: Just saw the link for venom. May look into using the front from them and returning the pitbull if its less than half the price. Is the quality on the venom stands ok?
    Last edited by dpriece; 04-06-2017 at 12:36 PM.

  8. #8
    EBRforum ProvNov
    Join Date
    Jun 2017
    Location
    SC USA
    Posts
    69
    I'm just now finding this and the link above for the venom stands is no longer valid. Can anyone vouch for them and point me towards the right ones (front and rear)? An Amazon search for Venom EBR turns up nothing and Venom Buell turns up no rear stand but three front stands - for Friebolt, XB9 / XB12, and Blast / Cyclone. Thanks

  9. #9
    EBRforum Junkie 1190SX's Avatar
    Join Date
    Jan 2017
    Location
    USA
    Posts
    413
    Or you can get the trackside brand and bend them out to fit

    Walmart has the Venom brand
    https://www.walmart.com/ip/Venom-Mot...B12R/187287676
    Last edited by 1190SX; 06-28-2017 at 09:30 PM.

  10. #10
    EBRforum Junkie
    Join Date
    Apr 2014
    Location
    RI
    Posts
    444
    It's just the standard Venom stand. I now have 2 because it listed the wide one in one of their adds as for wide bikes. When I mgot it it was the same as the standard one I bought! O well.

Similar Threads

  1. New RX/SX: Exhaust finish tips (no ECM), New Radiator Set, CF Front and Rear Fenders
    By bthibodeaux in forum EBR / Buell Wanted or For Sale -- Parts
    Replies: 7
    Last Post: 03-06-2017, 10:29 AM
  2. Replies: 12
    Last Post: 01-07-2017, 11:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •