I was on Revzilla to order mirror adapters https://www.revzilla.com/motorcycle/...bar-end-mirror so I poped out my left bar cap and it looks like its 1" but then it gets smaller about 1 " in ward, So which size adapter do I need 7/8 or 1" ? thx. Well I call Revzilla and they said a 7/8 should do it .
Last edited by EBRRider; 02-27-2017 at 05:38 PM.
7/8" but most of the ones out there are to long because of the internal bar.
I got my 7/8 adapter from Revzilla, and just like you said too long, So I drilled about 3/8 of a inch deeper on both sides, works great now, got rid of the lolly pops and went with the CRG lane splitters.Originally Posted by Kid Thunder
Last edited by EBRRider; 03-03-2017 at 08:25 PM.
You drilled out the bar? Great idea. I was going to cut down the rubber mounts from my ebay mirrors for my CRG Arrows.
Sounds like a safer idea. Those Arrows are expensive. Wouldn't want to lose one! Thanks!
I called Rev , they suggested I move my control further in, and clamp the mirror right on to the bar, and not use a adapter at all ,so that is another option. The bar drilled very easy soft metal, worked well.
Thanks I think I'll try the drilling thing.
I ended up drilling in a little further with a 3/4 inch bit and using a 1" bar end adapter. Works great.
Posting Permissions
Reply With Quote