Not that good at this pics came through upside down.
Not that good at this pics came through upside down.
looks good! Glad you got one in australia. you can flip them around in paint, or maybe online somewhere. iphone pictures?
I'm attaching the pics upside down or in the correct orientation from either my laptop or iPad, but when they load they always load inverted, wierd.
Great bike.
What front end did you put on it ?
Mike
What front wheel, brake discs and kit for alterations under the two discs?
It's Brembo M4 calipers? Front fork from RSV4 Factory?
Last edited by zviadi; 10-22-2016 at 12:53 AM.
EBR 1190 RX
I purchased from LAP the RS triple clamp which has a 56mm bottom and 54mm top triple.
I used an aprilia tuono cast front wheel and aprilia ohlins forks 56mm bottom. Purchased some aluminium tube and had it machined to fill the gap between the top of the 51mm forks and 54mm top clamp.
The forks are 8mm closer together than the aprilia so I had 4mm machined off each side of the wheel to have the discs mount correctly for the brake Calipers and 4mm from the wheel spacer. As the spindle was torqued 4mm protruded on the side opposite to the spacer.
The Showa BPF forks weren't to my liking even after a revalve, so I improved the handling and the braking for my liking.
weighed all the parts and the weight was only increased by .78lbs.
It's because the forum is based in North America and you're in Australia! 😂Originally Posted by Adelaideebr
I have to admit... it looks nice de-stickered.
Adeldeebr -
Nice work on the front end swap.
Mike
Posting Permissions
Reply With Quote