-
Bearings?
So I have seen discussions on brake pads, chains and other such parts but no threads on wheel bearings. Does anyone know of any parts cross-overs for wheel bearings and head bearings? I know there are guys out there racing that have to be burning through some.
EBR part numbers:
Front wheel bearing - E0005.1B6
Front wheel dust seal - EA0002.1B6
Rear wheel bearing - E0005.08AZ
Rear dust seal - EA0003.1B6
Steering head bearing - E0002.1B7
-
You should be able to read the bearing numbers directly off the bearings. Next time someone changes a tire, hopefully they can check them and post the numbers.
-
Rear bearing, 6007-2RS http://www.qualitybearingsonline.com...ring-35x62x14/
Rear seal size is 62X42X4
Front bearing, 6206-2rsr-c3 (bearing measures 30 ID, 62 OD and 16 thick) http://www.qualitybearingsonline.com...ring-30x62x16/
Front seal, don't have yet.
I'll check the front next time I have them off.
-
The other day I have to change the rear bearings to the non-original - I'll write about the results.
According to my information, steering head bearing are only original, the same as on the 1125. My friend at 1125 could not pick the non-original.
-
Neck Bearings.
http://www.ebay.com/itm/E0002-1AM-Ge...1XL8I~&vxp=mtr
same from 1125 to 1190 I believe.
^ confirmed from EBR they are the same
-
1 Attachment(s)
Original rear bearing is NSK 6007DDUC3E
Attachment 1497
-
Anyone got a link on the rear wheel seals? Or do I even need to change them if replacing the bearings?
-
I'd recommend staying away from All Balls bearing kits (assuming they even make a kit for the EBR). I believe their kits use KML bearings with blue colored seals. They simply did not last very long on my XB bikes.