PDA

View Full Version : LAP Selling EBR Parts!



TerryS1980
01-26-2016, 05:57 PM
http://www.liquidap.com/ebrparts/

buell-fan
01-26-2016, 07:07 PM
Thanks for the list Terry. Looks like they are selling off parts at a 20% discount. That's not too bad, and far better than scrapping them for weight.

bthibodeaux
01-26-2016, 09:16 PM
Thanks, but can't find the link to the list on the site. Can you let me know how to get to it?

TerryS1980
01-27-2016, 06:48 AM
785

http://www.liquidap.com/wp-content/uploads/2016/01/EBR-Parts-Catalog-for-Online-1.xlsx

Hughlysses
01-27-2016, 07:23 AM
The link directly to the list posted above works, but the link to the list is not showing on LAP's page right now (7:23 EST). I'm guessing they took it down temporarily while they update the list.

Hughlysses
01-27-2016, 07:52 AM
Interesting items on the list starting at line number 742:

786

I'm guessing these are the ~250 complete, ready-to-ship bikes that were in the factory. There's no price listed, some of them are export spec, and the US spec bikes might be very difficult or impossible to register given the fact EBR doesn't exist. Still, it'll be interesting to see what happens with them.

TerryS1980
01-27-2016, 08:52 AM
Yes i'd be interested to know pricing on the bikes. Someone needs to email Marissa at LAP.

If the bikes came with a MSR, some states could register. Louisiana would probably register it as a Buell. That is what my title says.

Hughlysses
01-27-2016, 08:54 AM
Yes i'd be interested to know pricing on the bikes. Someone needs to email Marissa at LAP.

If the bikes came with a MSR, some states could register. Louisiana would probably register it as a Buell. That is what my title says.

Yea, I expect it'd be possible to register one in SC. Once you got it titled, it might be possible to transfer it to a state with a more difficult licensing process. Hmm....

Need4speed
01-27-2016, 09:20 AM
http://www.liquidap.com/portfolio/ebr/

I called them just now and they are looking for people to buy inventory. They have not decided if they will sell some parts to individuals, bulk sell everything to single buyer, or hold to them as part of the sale to someone who purchases the manufacturing part of the company. Go to the website and call them if you have a interest. I left a message and they will get back with me once they know what direction they are going to go.

Need4speed
01-27-2016, 09:27 AM
I cannot seem to get an inventory list on their site right now.

noone1569
01-27-2016, 10:08 AM
I emailed Marissa regarding the bikes. . .

d_adams
01-27-2016, 12:18 PM
The answer on the bikes for sale is not right this minute, possibly in a few weeks or month.

TerryS1980
01-28-2016, 06:39 AM
Try this....
https://www.dropbox.com/s/5fiethypjb0pa8g/EBR-Parts-Catalog-for-Online-1.xlsx?dl=0

Ed / AF1 Racing
01-28-2016, 07:24 PM
The maker of the radiators contacted us. They have 500 of each in stock, LH, RH, and oil.

Holy **** that is a ton of radiators.

If no one needs them, they are hitting the recycle pile soon...

dmhines
01-28-2016, 07:59 PM
The maker of the radiators contacted us. They have 500 of each in stock, LH, RH, and oil.

Holy **** that is a ton of radiators.

If no one needs them, they are hitting the recycle pile soon...


Are they selling them direct ?? Even at $50 per set they would be making more than scrap $$$ ...

d_adams
01-28-2016, 08:35 PM
I'd buy a couple of sets if they were priced right.

Doosh
01-28-2016, 08:59 PM
The maker of the radiators contacted us. They have 500 of each in stock, LH, RH, and oil.

Holy **** that is a ton of radiators.

If no one needs them, they are hitting the recycle pile soon...

I want 2 sets. (seriously)

noone1569
01-29-2016, 08:20 AM
I need a set as well if the price is right.

AKA Marco
01-29-2016, 08:25 AM
same here, ill get 1 set if at a good price!

dmhines
01-29-2016, 10:13 AM
Group buy .. .$50 per set ... :)

d_adams
01-29-2016, 10:25 AM
Who's the OEM for them?

Doug Porcaro
01-29-2016, 10:54 AM
I'd also be interested in at least two sets if the price is right. I'd hope it'd reflect the fact they'd be scrapped otherwise...

noone1569
01-29-2016, 11:18 AM
Just received this via e-mail from LAP:

Kickstand Up, Ready to Roll...


EAST TROY, WI – EBR Motorcycles has recently completed the protracted Wisconsin Chapter 128 business restructuring that began last April. The EBR 2012 – 2015 model parts inventory, brand name, trademarks, patents, operating licenses, testing equipment, assembly lines and all the future models under development are now owned by Liquid Asset Partners of Grand Rapids Michigan.

Liquid Asset Partners is actively reviewing options for a qualified individual or company to acquire or finance the motorcycle business and take it to the next level.

Erik Buell, founder of EBR, said, “This is indeed an incredible opportunity for a huge head start on getting an American sport motorcycle business going. I have to thank Bill Melvin Jr., Bill Sr., and the team at Liquid Asset Partners for seeing this and working toward activating the assets and building motorcycles again. It is also great that they have stepped up to immediately address parts availability for EBR owners. The old company had many of the pieces in place for success, and I am very energized by the opportunity to re-engage under a new corporation with the right ownership and focus.”

Kim Tordik, key management member, has worked side-by-side with Erik for over 30 years. Kim started with Erik in the early years of the fledgling Buell Motor Company, continued through the Harley years and on to the start-up of Erik Buell Racing. “I have seen and been a part of all the challenges and successes over the years. Working with Erik, we have always focused on keeping the customer first and top-of-mind. The amount of energy and enthusiasm for Erik Buell and his legacy brand is as prevalent now as ever. Knowing personally the extraordinary assets that are available and the creative talent we have, the best years are still ahead.”

The first step, beginning next week, will be to make service and repair parts available directly from Liquid Asset to the owners of the EBR RS, RX and SX models, as well as performance parts for previous Buell models that had been available from EBR. Since the motorcycle selling season is approaching quickly, management is making significant progress towards plans for the production of new RX and SX models. The goal is to have 2016 model EBRs rolling by mid-March.

Steve Smith, key management member, says “the ‘muzzle is off’ and that it is time to reach out to EBR suppliers, dealers, customers and fans around the world. During the restructuring process it was inappropriate for the staff to talk about the specifics. Not being able to speak up was very frustrating, as there was no shortage of false information and speculation being spread. The “Buell Nation” and EBR enthusiasts were inundated with all sorts of opinions and misleading stories over the last 9-10 months. With Liquid Asset now in control of the motorcycle assets and intellectual property, we are in a position to begin the process of restarting. We love and appreciate the continued enthusiasm of the EBR riders groups; to help with the future success of EBR, we encourage riders and enthusiasts to talk to their closest dealer and prepare their personal finances for hopefully buying a 2016 model EBR.”

Once the plans are implemented, the path is open for the next step of growth. The American innovation, speed and persistence of Buell and EBR that have been demonstrated and appreciated by hundreds of thousands the world over will still require significant resources to move to the next chapter. Liquid Asset has taken on the mantle of “brand steward” and is committed to preserving the true American Sportbike company with its lineage going back to 1983. Along with production initiating on RX and SX, new segment busting models that deliver Erik’s unique vision are on the drawing board. The new company has many assets and is ready to expand rapidly.

Anyone interested in more information about the EBR opportunity should contact Liquid Asset Partners at www.LiquidAP.com (http://www.liquidap.com/).

Anyone interested in EBR parts should visit www.LiquidAP.com/EBRparts/ (http://www.liquidap.com/EBRparts/)

Thank you,
Team EBR

mackja
01-29-2016, 11:30 AM
I have to say that is the most positive thing I have read in a while, this seems to be great news, maybe I can stop hording parts.

steve-l
01-29-2016, 01:44 PM
I'd also be interested in at least two sets if the price is right. I'd hope it'd reflect the fact they'd be scrapped otherwise...

Me too! Who has them and how do I buy them?

AKA Marco
02-03-2016, 08:53 AM
i have mailed them an order form last week, a big one actually, but i haven't heard since.... i sent them an follow up email yesterday but nothing yet...

as anybody placed an order o received parts from LPA??

Ace117
02-03-2016, 09:11 AM
I placed a huge and $$$ order, I heard back from them yesterday. They said that they probably wouldnt get to my order till the end of the week or possibly next week because they have had alot of oders come in. Did anyone pull the trigger on a quick shift hit?

GJB
02-10-2016, 11:21 PM
Has anyone receive anything yet from LAP?

Hughlysses
02-11-2016, 05:27 AM
Has anyone receive anything yet from LAP?

Several people have posted on Facebook that they received their orders.

d_adams
02-11-2016, 07:02 AM
10 days for me and still no invoice or total even after several replies back that it was being worked on. :(

Ace117
02-11-2016, 07:15 AM
Same here, all I got were replies to my emails, at least I got that so far.

1313
02-11-2016, 12:10 PM
Makes me feel better that I'm in the same boat.

I'd feel A LOT better if I had some parts coming my way, however.

Maybe my (first - and potentially only?) order wasn't big enough for them, or there are just too many orders making them overwhelmed...

Kind of has the same feel as the EBR Racewear purge...

mrlogix
02-11-2016, 12:15 PM
I placed an order last week and was told that they would confirm/ship in 7 to 10 days.....still waiting confirmation.....

Hughlysses
02-11-2016, 12:47 PM
Here's a pic of one (alleged) received order posted to the EBR 1190 Owner's Group on Facebook:

801

ljm
02-11-2016, 02:28 PM
I got mine.

yamatr3
02-11-2016, 02:45 PM
If I wanted the race exhaust for the RX, is this the correct part number? S2111.1B6

Need4speed
02-12-2016, 11:18 PM
Got my order, red air box cover, exhaust tips with new ECM, and shifter toe knobs. They are very backed up, need to hire more people.

GJB
02-13-2016, 12:27 AM
Those of you getting parts, how long dod it take? I am going on 2 weeks without a response on shipping cost yet

hillis3
02-13-2016, 08:17 AM
It took two weeks from the time I ordered to the time I got my parts, But to be fair I ordered my parts when they first uploaded the list so I was probably one of the first orders in. They do not have a large staff pulling parts and they only pull on Tuesday and Thursday. So as more people ordered it's going to take them longer.

Plotter
02-23-2016, 07:59 PM
Out of the tips and ecu combo from LAP...

d_adams
02-23-2016, 09:14 PM
That's an RS exhaust, not an RX. Retails at $2700. ECM won't work on the RX, not to mention the RS has 2 of them. There are other options that are considerably cheaper and just as effective if not more so.

d_adams
02-23-2016, 09:17 PM
Btw, they finally processed my order from Feb 1. I actually called it in prior to that, but submitted the filled out pdf on the 1st.

mrlogix
02-23-2016, 09:26 PM
Marrisa called me and my order will be processed this Thursday (2/25). :pray:

noone1569
02-24-2016, 09:12 AM
Welp everything I really wanted is sold out so I cancelled my order.

Von
02-24-2016, 04:00 PM
Here's a pic of one (alleged) received order posted to the EBR 1190 Owner's Group on Facebook:

<img src="http://ebrforum.com/attachment.php?attachmentid=801"/>

Yeah that's my order!! Chain slider on right. I was really hesitant about dropping that much, but apparently it's a good thing I did.

Classax
02-25-2016, 09:27 AM
Either we have a very few people hoarding parts or there simply wasn't that many available in spares, or they really are going to restart production. I'm invlinded to hope for the latter but a combination of the former seems more likely. I'm curious about the production of new parts.

Hughlysses
02-25-2016, 11:18 AM
The paperwork I saw from the auction said there was one lot that included these spare parts, and another lot that included completed bikes, incomplete bikes, and the parts needed to finish those. There was speculation on Badweb last night that there may be a LOT of 1190 parts somewhere that were in the pipeline to support production of a LOT of 1190's. So there well be more parts that can be made available, even if new production of parts doesn't re-start.

It sure would be interesting to know what's going on behind the scenes.

d_adams
02-25-2016, 12:12 PM
There was less than 1k produced and pushed out the door and maybe 1200 in total if you include the partially finished bikes at the factory if my info is correct. Seems like I had heard roughly 900, 1/3 of them went to Australia, 1/3 here in the US, the rest were spread around in Europe I think.
I do know they were targeting 3k in the 2nd year of production and then stepping up even more the next year, obviously that didn't happen. Where all those possible spares went is anybody's guess at this point.

Classax
02-25-2016, 01:22 PM
There was less than 1k produced and pushed out the door and maybe 1200 in total if you include the partially finished bikes at the factory if my info is correct. Seems like I had heard roughly 900, 1/3 of them went to Australia, 1/3 here in the US, the rest were spread around in Europe I think.
I do know they were targeting 3k in the 2nd year of production and then stepping up even more the next year, obviously that didn't happen. Where all those possible spares went is anybody's guess at this point.


I am inclined to think there are not that many out there. Case in point it would appear the entire inventory of radiators and oil coolers has been put on the market. That does not bode well for a company getting ready to re start production. I'm still in wait and see mode.

Hughlysses
02-25-2016, 05:11 PM
I am inclined to think there are not that many out there. Case in point it would appear the entire inventory of radiators and oil coolers has been put on the market. That does not bode well for a company getting ready to re start production. I'm still in wait and see mode.

Well, we all have to be in wait and see mode for right now.

Note that Ed from AF1 posted that they were considering getting another order of radiator/oil cooler sets, so who knows how many there still are at the factory. Former EBR Program Manager Michael Richter (who currently lists his employer as Polaris) posted on an 1190 parts thread on Facebook and said something to the effect of "they're working on getting more parts, don't panic". That seems like a very good sign to me.

d_adams
02-25-2016, 08:12 PM
I am inclined to think there are not that many out there. Case in point it would appear the entire inventory of radiators and oil coolers has been put on the market. That does not bode well for a company getting ready to re start production. I'm still in wait and see mode.


I got that number from a couple of sources that are "in the know" on total production numbers. As far as the radiators showing up on the market, well, the guy was sitting on $300k of inventory that wouldn't sell otherwise as the supply chain for them was broken. No one was buying them at $750/set retail, so most likely that was close to his cost to produce them. Sell at cost and recuperate some of the funds invested or scrap them and lose money. IDS was released to sell their ECM's, the radiator guy probably got the same phone call or letter letting him sell them. Sure, it would have been a write-off for taxes, but it could have been a small supplier where these represent a HUGE investment in capital that they couldn't afford to write off. I certainly couldn't afford to do it.

Ed / AF1 Racing
02-26-2016, 01:43 PM
the rad supplier has about 400 sets left in his warehouse.....he got burned big time....he's out well into 6 figures of $. Sold us a lot way under his cost just to recoop something, and free up space for other projects.

That is going to be the big hurdle.....getting all the burnt suppliers to build another batch of anything. I bet most of them shipped product to EBR before the shutdown with a promise of a check. No check ever arrived.

If anyone of them built a batch before the shutdown and still have it, they might sell that stock to LAP or to the public directly.

In the future, they'll likely never build another batch for EBR without pre-payment.

noone1569
02-26-2016, 01:56 PM
Damn, Ed. That sucks. I'm sure there's a lot of similar stories that will emerge from this.

zviadi
05-01-2016, 04:30 PM
I need left footpeg assembly - I can not find in microfiche designation.

buell-fan
05-01-2016, 07:26 PM
Here is the link. It is a PDF file that automatically downloads to my phone, so it may be different for your; Google search "ebr 1190 chassis parts pdf". The footpeg assembly is in the two prints with the engine, pages 1-4.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://cdnmedia.endeavorsuite.com/images/organizations/05211b9c-b6c7-4840-8e84-2970c2318c24/ebr_rx_sx_parts_ari.pdf&ved=0ahUKEwif7_Pwj7rMAhWC4yYKHaJLA2gQFghZMA8&usg=AFQjCNFEqNqysS1Ry4USkiLbhhghcKIgaQ&sig2=lskJY4FLx_4VZyMAM75BeA

TerryS1980
05-01-2016, 09:02 PM
Here are the parts for rider pegs..
881

zviadi
05-02-2016, 03:18 AM
Thanx, guys!
I bought a USB flash drive with parts-list and service manuals on this site (EBRforum), but it has bugs in microfiches! Instead of these part-numbers is the inscription "Included in 39 below". Fig. 39 - this is a common nut M6:headshake:

I wrote to LAP, I hope they will respond quickly.

Jbaker229
05-02-2016, 08:19 PM
Thanx, guys!
I bought a USB flash drive with parts-list and service manuals on this site (EBRforum), but it has bugs in microfiches! Instead of these part-numbers is the inscription "Included in 39 below". Fig. 39 - this is a common nut M6:headshake:

I wrote to LAP, I hope they will respond quickly.


Hi Zviadi. I am really sorry to hear about your crash. That car that lost its wheel needs to be taken off the road and the driver needs to be punished.

When you look at the EBR manual one part often refers to other parts. If the manual appears really small (microfiche) then see if you can adjust your .pdf settings so you can view it in a larger picture size. If you need help let me know and I can send you a manual with larger pictures.

zviadi
05-03-2016, 12:59 AM
Thanx for your help.
I understood from microfiches and has already sent the order to the LAP.

Hughlysses
05-13-2016, 09:23 AM
LAP's 20% discount on parts supposedly ends on Sunday- this was posted to EBR's Facebook page earlier this week. Dan Hurda also posted on FB that the "store" at ebr.com would be going active again on Monday.

Mike
05-14-2016, 01:15 AM
Huge thanks go to Marissa (LAP) for getting me a box full of parts, including the replacement for my bad gauge cluster.

Mike

zviadi
05-14-2016, 06:42 AM
LAP's 20% discount on parts supposedly ends on Sunday- this was posted to EBR's Facebook page earlier this week. Dan Hurda also posted on FB that the "store" at ebr.com would be going active again on Monday.

Hmmm...
I hope that's no reason that i wait answer from LAP for 2 weeks...

1313
05-14-2016, 09:03 AM
2 weeks seems EXTREME. I Emailed my latest order at 5:48 pm on May 10th. I received an Email stating that my order had been received (and would be contacted when it's complete or if any questions arise) at 3:09 pm on May 11th. If you have had no response at all, I would resend your order making mention of when it was originally sent - before the weekend is up.

zviadi
05-15-2016, 01:46 AM
I wrote the first letter on 2 May. The second letter I wrote on 9 May. I was told that I did not care, and soon my order will be engaged.
It's been 13 days

zviadi
05-24-2016, 02:54 PM
22 days in anticipation. Can never count the cost of shipping in Russia.
I'm tired of waiting. I did not expect that there will be problems with spare parts.

I may need to buy a second bike - suddenly ordering spread over six months ...

zviadi
05-27-2016, 01:00 AM
I was personally involved in the calculation of shipping.

Find out what the problem is - UPS not send parcels to other countries over 100 cm in length. Just something long and thin, such as fishing rods. Not fairing. LAP is not guilty for this hitch.
I had to withdraw from the purchase fairing...
For other parts shipping is calculated without any problems.

Hughlysses
05-27-2016, 08:03 AM
I was personally involved in the calculation of shipping.

Find out what the problem is - UPS not send parcels to other countries over 100 cm in length. Just something long and thin, such as fishing rods. Not fairing. LAP is not guilty for this hitch.
I had to withdraw from the purchase fairing...
For other parts shipping is calculated without any problems.

Crazy. Can you get them shipped by some other means?

zviadi
05-27-2016, 08:11 AM
I've already ordered the production of a full set of fairings in my city.
The remaining parts LAP promised to send.

Hughlysses
05-27-2016, 05:01 PM
^ Very interesting. This was posted to Facebook today: Northern Classic, Custom and Race AB of Sweden will be providing parts,service for the European market. Hopefully that would make it less of a headache for you to acquire parts in the future.

zviadi
05-28-2016, 12:46 AM
The problem is that the Russian Federation does not apply to the European Union and with United States is bordered only by oceans. Perhaps the UPS does not send large things only in Russia. Perhaps this big box is not placed in the airplane. Perhaps the reason for economic sanctions against Russia.
If delivered spare parts by courier service, such shipping will be more expensive the cost of the spare parts. I'm not that rich man :)

In NCCR very high prices.

zviadi
06-14-2016, 12:35 AM
It seems that my saga ends with the purchase of spare parts from LAP. On all spent 1.5 months of my life, and 430$ for shipping. On spare parts I spent 960$.
Very expensive shipping, very slowly respond to my letters. I had to write several times the same thing.
AF1 not is engaged selling of spare parts for EBR?

TerryS1980
06-14-2016, 12:46 AM
I'm guessing you chose UPS because that is what was required. UPS is the worst when delivering across seas. Our US postal service and DHL is much more reliable when shipping overseas.

zviadi
06-14-2016, 01:03 AM
I asked to send USPS - they refused. UPS only.
I have 8 years to buy different items in the USA and have never encountered such a expensive and slow shipping.

Hughlysses
06-14-2016, 07:10 AM
Sorry to hear this was such a hassle. After all the publicity your crash video received, EBR would have done well to send you the parts for free and tell people about that. Hopefully things will be MUCH better in the future.

noone1569
06-14-2016, 07:13 AM
Wow. I probably could have ordered the parts for you and sent them via DHL for half that price =(.

zviadi
06-14-2016, 07:27 AM
I also hope that these difficulties are related to the formation of the company after bankruptcy.
In any case, now I have to assembled my bike and continue riding.

GJB
06-16-2016, 12:11 AM
Wow, I am visiting Moscow and St Petersburg early next month. I could have brought them to you

zviadi
06-16-2016, 12:41 AM
Thanks guys!
If You'll be in Saint-Petersburg - can meet. Without spare parts.
But I don't have a car and I'm speak English very bad)))

GJB
06-22-2016, 12:28 AM
sent you a pm