View Full Version : valve shim warning ⚠
rx1190kevin
11-25-2015, 10:56 AM
Hey guys,when doing the adjustments,make sure to NOT leaving the cam followers in the valley BETWEEN the valves while rotating the engine manually with a breaker bar. A counter weight block on the exhaust cam shaft will come along and crack your follower. Now I have to get the cam block off the head to slide the follower off its shaft,oh JOY!
I just got the rear cylinder checked myself. No adjustment required..!
Gotta let my shoulder rest (broken collar bone) a day or so before I tackle the front.
Not looking forward to putting the airbox base back in place...
Thanks for the heads-up.
Mike
rx1190kevin
11-26-2015, 01:19 PM
741 the best Thanksgiving,to remove the cam follower WITHOUT loosing valve timing,take hydraulic chain tensioner screw plug out, remove 8 cam block bolts ,that will give you enough room to lift the blocks over the location dowels ,then slide the idle side block out. See attached pictures
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.