PDA

View Full Version : New engine code event



zviadi
09-23-2015, 02:44 PM
After stopping the engine, and re-run it, sometimes (!) on the instrument panel icon "check engine" and the message: "New engine code event"

630
If i'm start the engine, these icon and message disappear. On the driving characteristics are not affected.


The question is - which means that message and how to remove it?

rocketjump
09-24-2015, 02:54 AM
Engine events typically arise from the ECM receiving faulty signals from one or more of the sensors. The best example is the darn O2 sensor that keeps going off on my bike. Goto the menu and check the diagnostics, if the 'events' are still under the current faults portion of the menu it might be worth checking into. If it's like the O2 sensor which goes off every 100 miles or so and is moved to the historic fault section it's probably not worth your time.

You can clear the historic faults, the current faults you won't be able to have cleared.

zviadi
09-24-2015, 04:53 AM
You're right! Thanx.
Just I talked on the phone with the dealer. He said that message "New engine code event" indicates that, to go to the menu and see a new error code.