Hi... is this part no. H0110.1B7ZT Rev B legit?

[Buell Ghoul]

New guy here from across the pond... looking to update my 6 pot to 8 pot calliper... they seem a lot cheaper in the states... even including delivery & import taxes... unless it’s ‘to good to be true’ !? :jawdrop:

So just curious if this is a genuine part... H0110.1B7ZT Rev B... it’s the Rev B I don’t understand?... are there actual copies of callipers out there?... or should I not worry... lol !? :slap:

Anyways... appreciate any advice... Many Thanks in advance :thumb:

[d_adams]

Yes, it's a legitimate price. $200 roughly for a loaded caliper (comes with stock pads).

https://www.amazon.com/Erik-Buell-Racing-CALIPER-ASSEMBLY/dp/B077DKK744
https://www.ebay.com/itm/EBR-Erik-Buell-Racing-1190SX-1190RX-FRONT-CALIPER-ASSEMBLY-H0110-1B7ZT-Rev-B-/202310623975

They still list the caliper as a $500 part new, so I'd get it from Ebay or where ever it is you prefer.

http://www.erikbuellracing.net/store/h0110-1b7zt-front-caliper-assembly.html

[Buell Ghoul]

Yes, it's a legitimate price. $200 roughly for a loaded caliper (comes with stock pads).

https://www.amazon.com/Erik-Buell-Racing-CALIPER-ASSEMBLY/dp/B077DKK744
https://www.ebay.com/itm/EBR-Erik-Buell-Racing-1190SX-1190RX-FRONT-CALIPER-ASSEMBLY-H0110-1B7ZT-Rev-B-/202310623975

They still list the caliper as a $500 part new, so I'd get it from Ebay or where ever it is you prefer.

http://www.erikbuellracing.net/store/h0110-1b7zt-front-caliper-assembly.html


Thank You Sir... just need a matching brake master cylinder... would you have any ideas of all models/years that I can use... I believe I need a Buell 19mm !? :cool:

[LeesEBR]

They append "Rev <Letter>" each time there's a design change. RevB just means there's been two revisions since the original design.

[Cooter]

The 19mm master cylinder came as a linear master with integrated reservoir on '08-up Buell XB AND 1125 with the ZTL-2 caliper (so not the City-X).

You can also use the radial master that came on EBR 1190's, or any aftermarket 19mm master for 7/8" bars.

I have all of that stuff (slightly used) here in California USA if its worth shipping to you.

[Buell Ghoul]

That’s cool to know... Thanks Guys :thumb: