PDA

View Full Version : Torque reading on countershaft sprocket bolt?


Kid Thunder
08-21-2019, 05:00 PM
Torque reading on countershaft sprocket bolt?
Thanks.
ACM
08-22-2019, 07:29 AM
The chassis parts pdf shows 108.5-111.2 N-m, 80-82 ft-lbs for that bolt
Cooter
08-22-2019, 11:34 AM
That parts .pdf is a gold mine of info:cheers:

These a short and a long one out there. Make sure you get the 63 page(!) one that includes the engine sub-assemblies. I printed the whole thing out and put it in a binder in the garage:bannana:
LeesEBR
08-22-2019, 04:22 PM
What countershaft sprocket bolt? And I'm not finding "111.2" in any of the PDF's.

Curious what engine and manuals you all are looking at.
EBRRider
08-28-2019, 03:45 PM
What countershaft sprocket bolt? And I'm not finding "111.2" in any of the PDF's.

Curious what engine and manuals you all are looking at.

Shows it here. http://buellmods.com/
LeesEBR
11-18-2019, 12:36 PM
Shows it here. http://buellmods.com/
I own that site, but thanks. I finally found what was being asked, it's the bolt on the Output Shaft, holding the output sprocket, on page 19.

It was confusing the hell out of me since these transmissions don't have a countershaft. Also the text in the PDF is too small to be picked up using Chrome's find function. Found when I opened it in Bluebeam.
LeesEBR
11-19-2019, 12:28 PM
Not sure what you're going for, but you just linked the same documents that are available at BuellMods.

Cleaned them up so Facebook doesn't track the analytics:
http://www.erikbuellracing.net/wp-content/uploads/2016/05/1190-ET-V2-Parts-Manual.pdf

http://www.erikbuellracing.net/wp-content/uploads/2016/05/1190-RX-SX-CHASSIS-PARTS-BOOK.pdf
EBRRider
11-19-2019, 12:38 PM
thx ^^^^^^