PDA

View Full Version : Gear Indicator



DavidL
06-15-2019, 08:08 PM
Just curious...when you pull in the clutch does the gar indicator not register what gear you are in?
ive had a minor issue of the bike stalling with the clutch pulled in and didn’t know what the exact issue might be. When I started This morning with the clutch pulled in while the bike was in first gear bike lurched forward as if the clutch wasn’t pulled in so I’m thinking there needs to be in adjustment as my night pull the clutch and it’s not pulling all the way in or working as it should. I adjusted the clutch lever so it is all the way out but I have not had a chance to ride the bike to see if there’s any difference

EBRRider
06-15-2019, 10:57 PM
Might need to bleed the slave, or replace it with a Oberon. Normal to go to a - once clutch is pulled in.

DavidL
06-18-2019, 08:50 AM
thanks for the info....just learning all the ins and outs of the bike. this may be only the second bike I have had a gear indicator...so I should just ignore it. I have learned that when the clutch is pulled in and you put it to neutral that it shows the N where as the gears are just the dash