View Full Version : Foot Peg Spring Installation?
CTFutura
02-17-2018, 05:37 PM
Anybody have a easy way to reinstall foot peg with spring? Trying to re-install without losing an eye or finger.
Thanks.
White SX
02-17-2018, 07:23 PM
Yes that’s not an easy one. Dont completely remember but thinking I used a smaller diameter rod initially then drove in the peg pin which drove out the smaller pin.
CTFutura
02-18-2018, 02:29 PM
White SX
Thanks for the tip. Used a smaller diameter clevis pin to get the holder and spring in place, then used a vise grip to hold the spring in the peg mount AND then with a little leverage on the spring with a screwdriver I was able to drive the permanent pin through while displacing the clevis pin. You're right, not easy but doable.
Thanks again for your response; it got me on the right path.
Kid Thunder
02-20-2018, 12:35 AM
I don't remember having a problem with it. If I remember correct just hold it down with your thumb then push the pin in.
CTFutura
02-20-2018, 06:54 AM
I don't remember having a problem with it. If I remember correct just hold it down with your thumb then push the pin in.
You must have one Herculean thumb! :thumb:
Cooter
02-20-2018, 01:36 PM
I've got Hulk thumbs and it was super hard for me. The punch/screwdriver trick worked well.
Kid Thunder
02-20-2018, 09:44 PM
That's what she said!!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.