2014 EBR RX rough idle.

[Tonz RX]

2014 EBR RX rough idle, stalls. Had a stall on a ride a week ago. Now it won't idle and threw 2 engine codes. Both front and rear O2 sensors. Any cross reference part numbers for the 02sensors and/ or suggestion where to find them?

Update!
https://imgur.com/a/l671z

Found the throttle body ajar! It took every combination of 1/4" drive extensions and 7mm sockets I own. But, I got it! Running perfect again! Thank you for your replies!

[EBRRider]

Just by chance have you checked the connections for both senors ? To make sure you have good contact surfaces ?

[MakingPAIN]

Yeah check some connections out on that bike they could be loose. I couldn't see both o2 going out at the same time.
And welcome to the forum.
We love pictures too!

[Tonz RX]

Thank you! I'll let you know

[buell-fan]

The intake boots like to push the throttle bodies up and then the bike's run like ****. Take a flashlight to inspect the throttle body position. The things should be flush with the intakes, as seen in the venturi with the throttle butterflys wide open. Make sure they band clamps are tight, but don't overtighten them.

[Nemesis]

Mines doing the same thing now as the original poster, tried to take off the airbox, realized i have to take the seat off first, struggled to get to the bolt im like **** this **** show.

I swear to christ these things vibrate themselves apart!

[zviadi]

Any cross reference part numbers for the 02sensors

http://ebrforum.com/showthread.php?1494-P1136-O2-Heather-Fault&p=11427&viewfull=1#post11427