PDA

View Full Version : FS: Dean Adams Oval Exhaust with matching ECM, Quick shifter, Tail Tidy, CRG Etc..



1190SX
06-10-2017, 02:57 PM
Dean Adams Oval Exhaust with matching race ECM...............SOLD

EBRRider
06-10-2017, 07:15 PM
If you dont mind, Why are you going back to stock ?

1190SX
06-10-2017, 07:33 PM
I'm probably going to be selling my bike soon. I have gone through a lot of bikes and have found putting them back to stock brings more money. Most people don't see added value when you customize, just stuff you changed.

EBRRider
06-10-2017, 07:52 PM
I'm probably going to be selling my bike soon. I have gone through a lot of bikes and have found putting them back to stock brings more money. Most people don't see added value when you customize, just stuff you changed.

You are absolutely correct !

1190SX
06-10-2017, 09:22 PM
So I rode the bike this morning with all the mods, and then tonight without them.

Dean Adams exhaust and ECM vs stock exhaust and ECM
I have to say this setup made a big difference in smoothness of the power band. Its a nice smooth roll all the way to the rev limiter, no power surges or flat spots anywhere There is a definite flat spot around 6-7000 rpm in the stock system. I didn't try riding it with the IDS ECM and the stock exhaust, but I'd like to see if it runs like trash or improves the flat spot if I have a chance. I suspect it will be too rich for the exhaust set-up. I will say I rarely had to go above 7500 rpm with Deans system, while the stock setup doesn't pull like a freight train until you get past 7500rpm. Kudos on the tuning and design Dean. Out of all the mods this is probably the one I would keep if I could only have one on the bike.

EBRRider
06-11-2017, 11:28 AM
http://i64.tinypic.com/2a6jtdl.jpg

http://i65.tinypic.com/282q0pd.jpg


http://i65.tinypic.com/2ld8zuf.jpg

FYI right CRG mirror has some minor cosmetic rash on it:
http://i66.tinypic.com/1532p2s.jpg

CRG mirror includes bolt to cap off and secure clutch and brake reservoirs.
http://i63.tinypic.com/292yb6s.jpg

http://i66.tinypic.com/alkuok.jpg

http://i68.tinypic.com/2nbgdn5.jpg


http://i65.tinypic.com/2z5uohd.jpg


http://i66.tinypic.com/swa24h.jpg

What ? no pics of my EBR quick shiftier ??? :wave:

1190SX
06-11-2017, 11:44 AM
IF you insist :thumb:

http://i63.tinypic.com/v2r285.jpg

EBRRider
06-11-2017, 12:01 PM
IF you insist :thumb: Thank you my friend! :301::301::301:

http://i63.tinypic.com/v2r285.jpg

Thank you my friend! :301:

1190SX
06-11-2017, 05:51 PM
Also have an extra Alpinestars Motegi 2 Piece suit size 46US if anyone is interested. $625 shipped

Cooter
06-13-2017, 02:32 AM
Sure! $$?? How old is it?

EBRRider
06-13-2017, 01:37 PM
Bumped up :bump:

1190SX
06-13-2017, 02:33 PM
Sure! $$?? How old is it?

Less than 1 year old. I'll add a picture of it later.

MakingPAIN
06-14-2017, 05:30 PM
Got the scoop with all hardware thanks buddy good deal....1490

1190SX
06-14-2017, 06:55 PM
Nice! Ride safe man.

mk2mike
06-14-2017, 07:50 PM
Have any photos of the exhaust?
What gearing did you have DA tune the ECM to?

I currently am running a 44t rear sprocket

1190SX
06-14-2017, 08:54 PM
I have the ECM for the stock gearing (41-43 tooth). Someone on here said they ran the stock ECM with a 44 and had no gear errors, not sure who it was.

http://i65.tinypic.com/2z5uohd.jpg

mk2mike
06-15-2017, 10:51 AM
So these ECMs are not like the 1125's? No way to log into them and just change stuff around?
how much would it be to have the ECM reprogrammed for the gearing?

i wonder if my local EBR dealer can do that even.

EBRRider
06-15-2017, 10:54 AM
So these ECMs are not like the 1125's? No way to log into them and just change stuff around?
how much would it be to have the ECM reprogrammed for the gearing?

i wonder if my local EBR dealer can do that even.

IDS sells them for $300.

http://idspd.com/xcart/products-ebr

1190SX
06-15-2017, 11:00 AM
IDS can reflash the race ECMs for a fee. I'll dig up my e mail correspondence with them later.

1190SX
06-15-2017, 11:03 AM
Per Tim Bloomberg from IDS
"If you choose a pre-tuned ECM and want to make changes to gearing or exhaust, we give you one free change in the first 6 months. Just send us the ECM, and we make the change and ship it back to you. After that, we charge $50 - $75 per change plus $10 shipping."

EBRRider
06-15-2017, 11:27 AM
Per Tim Bloomberg from IDS
"If you choose a pre-tuned ECM and want to make changes to gearing or exhaust, we give you one free change in the first 6 months. Just send us the ECM, and we make the change and ship it back to you. After that, we charge $50 - $75 per change plus $10 shipping."

Thats even better!!

1190SX
06-15-2017, 11:49 AM
If anyone is interested in the Exhaust, CRG mirrors and Rear spools I'll give you a package deal $900 shipped for everything.



Also FYI I won't be shipping anything next week if you want it you'll have to have it shipped this week or the following week

mk2mike
06-15-2017, 02:40 PM
I'm near Fresno, are you in CA... based on your photo and a recent CL ad I'm assuming you are?

How much for the exhaust and ecm picked up?
California hook up price?!

1190SX
06-15-2017, 02:59 PM
PM sent

1190SX
06-15-2017, 10:17 PM
Will also consider selling exhaust without ECM $625.

1190SX
06-16-2017, 10:13 PM
To the top

1190SX
06-18-2017, 12:59 PM
Fathers Day Bump!

1190SX
06-22-2017, 10:38 AM
To the top