PDA

View Full Version : Lower footpegs



Kid Thunder
12-31-2016, 03:14 PM
http://www.superstreetbike.com/2017-ebr-1190-black-lightning-exclusive-shoot#page-15
Look at the pictures of the BL. Near the end is a picture of the lower footpeg. Unless I'm wrong it is the Knights Design foot peg that can be ordered from Knights Design in one or two inch drop so I guess the controls can be adjusted enough to work with at least the 1" drop if not the 2" drop. time will tell.

buell-fan
12-31-2016, 03:29 PM
It appears that EBR has contracted with Knights Designs to make the lowered foot pegs for the Black Lightning. They may be available only through EBR though, depending on how the two companies contracted the deal. The Knight's Buell 1125 pegs can be made to work on the EBR with a little modification; that is how the Black Lightning design got started by Erik.

Kid Thunder
01-01-2017, 12:48 AM
What mod is to be made?

Sparky
01-01-2017, 12:52 PM
There is a small rib on the EBR peg mount that splays the 1125 peg up a few degrees from the horizontal. The mod is to file approx 1/10 inch from the back of the peg where it hits that rib, filing carefully so one does not file too much. Note this mod does not interfere with putting that peg back on a 1125 bike.

I did this mod to the ASB dropped pegs from my 1125R to fit a 1190 SX.

Kid Thunder
01-01-2017, 04:33 PM
Thanks. I have some original Buell dropped pegs that I had I my Moto Guzzi Griso. I'll see if I can find them.