View Full Version : Does anyone make a block off piece for the turn signals?
qurtrn10
09-05-2016, 09:55 PM
I plan on installing mirrors with integrated turn signals and remove the stock turn signals. Does anyone make a block off piece to fill in the holes left by the original turn signals?
Unfortunately...there's actually a "raised" portion of the body panel, above the normal panel surface.
So any "cover" will have to be well above the surface...or take a grinder/sand paper to remove the lump, which will likely create a new hole.
Mike
qurtrn10
09-07-2016, 10:51 AM
Argh... I'll either order a race panel (just the side panels if they'll bolt up to the stock upper and lower) or modify the mounts into a GoPro mount or something.
Thanks for letting me know.
TerryS1980
09-08-2016, 08:34 AM
If you see what I did here when I put smaller turns on my RX, you could easily do the same and just put a black bolt in it. I used 1/8" sheet rubber and traced the shape of the stock base.
1109
qurtrn10
09-20-2016, 11:42 PM
Until the 1190RS mirrors come in, I swapped in the shorter turn signals from the stock license plate bracket. It's not a tremendous difference, but it was quick and free for the moment.
http://i4.photobucket.com/albums/y109/WilliamWalker/EBR%20Number%202/2016-09-20%20-%20First%20day%20of%20ownership%2012_zpsy8os7his.j pg (http://s4.photobucket.com/user/WilliamWalker/media/EBR%20Number%202/2016-09-20%20-%20First%20day%20of%20ownership%2012_zpsy8os7his.j pg.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.