Here's mine. It's an XB12. It has the Hal's swingarm, Bison exhaust, Hal's ram air, Penske, Ohlins 25mm, Woodcraft clipons, unknown triples, EBR 6mm rotor and lots more. The bike is WAY better than me.
Here's mine. It's an XB12. It has the Hal's swingarm, Bison exhaust, Hal's ram air, Penske, Ohlins 25mm, Woodcraft clipons, unknown triples, EBR 6mm rotor and lots more. The bike is WAY better than me.
nice rig Tony, are those Woodcraft rearsets?
This's my Buell
Because every catalyzed Buell deserves the chance to rise again!
Here's mine.. a few mods (mostly this way when I picked it up)
Also.. hey to the other aprilia forum folks!
1998 Buell S1 White Lightning
Acid Dipped, Powder Coated Black
Chassis Modifications for stiffness per ProThunder
Chassis Modifications for 9/12R Magnesium Fairing Bracket, billet machined lugs welded to steering tube.
Swingarm
Steel swing arm with stiffening structure per ProThunder
Powder Coated Black
Works Performance Rear Shock
Aella Billet Aluminum Swing arm support
Front End
Ducati 996 TiN Showa Forks
Ducati 996 Upper and Lower Triple Clamps
Custom Steering Stem and Top Nut
Ducati 996 Clip-Ons
Ducati switch gear, left side (turn signals)
Ducati throttle control and run/start switch gear
Buell 9/12R Magnesium Fairing Support
Buell 9/12R Headlight
Buell 9/12R Instruments
Buell 9/12R Wiring Harness and ECM
Braking
Front : Dual Disc, Brake Tech Axis Carriers and Rotors, Ducati 996 Brembo Calipers, Brembo Lever and MC, new pads (with spare pads)
Rear: Stock Buell Rear Disc, Brembo 2-piston caliper, Brembo MC
Aella Billet Aluminum Rear Caliper Carrier
Wheels and Tires
Front: Marvic Magnesium Penta 2
Rear: Marvic Magnesium Penta 2, with Cush Drive
Metzler SportTec M-1
Body Work
SharkSkinz upper and lower XB bodywork
Custom Fairing Mounts
AirTech tail section
Ducati 996 front fender
Buell Carbon Fiber rear fender
Custom Paint by SunKing Concepts in Eagle, WI
Custom Graphics (vinyl) by Alberti Design
Stock S1 Seat
Stock S1 fuel tank (peanut), mod for internal fuel pump
Controls and Rearsets
Aella Billet Aluminum rear sets, shifter, and brake lever
Oil Tank
Aluminum Fabricated Oil Tank, per ProThunder specChassis
Last edited by rearview; 10-02-2012 at 12:47 PM. Reason: groundhog day.. was all in twice. wtf?
Hello guys, here's my Uly...
Last edited by Uly'73; 10-01-2012 at 04:33 PM.
My 2009 XB9: A few mods since, but pretty much the same.
Yes, they are. I like Woodcraft rearsets a lot. They're pretty basic and just work.
Thanks, but I have nothing to do with it's bad assness. It was originally built by Danny Balanski. He deserves the credit.
I have to say, there's a bunch of really nice Buells on the board already!!! I love rearview's tuber.
Last edited by Tony216; 10-02-2012 at 06:14 AM.