Page 1 of 9 123 ... LastLast
Results 1 to 10 of 88

Thread: Aftermarket parts lists

  1. #1
    EBRforum Junkie MakingPAIN's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix AZ
    Posts
    300

    Aftermarket parts lists

    i have been looking around for parts suppliers and i thought it would be a good idea for everyone to get together and post up any manufactures/suppliers they can think of that currently sells EBR parts

    -Hotbodies racing= race body work
    -R@G= frame sliders, grills for coolers, small tidbits
    -5-0dro= swing arm and fork protection
    -Driven racing= spools
    -Dean Adams= EBR exhaust/ special tools/ Buell exhaust
    -APH= exhaust
    -IDSPD= ECM (Dean Adams-APH-HMF-Muffler delete-programmable)
    -STITCH WILSON =seats stitch@customcycleseats.com
    -Diesel moto= rotors
    -Vortex= aluminum sprockets part #Vortex-821-43(43 tooth) and pegs
    -Amsoil= you know why
    -HMF= exhaust
    -EBC= brake pads
    -HIFLO= oil filters
    -Knight Design= lower foot pegs
    -AF1= store front for parts
    -Bestem USA= carbon body work
    -ABM=Clutch levers and brake levers
    -GB Racing= crash protection for engine cases
    -Motion Pro= throttle set up and cables
    -Wilbers= shocks
    -Showa= shocks
    -PowerBronze= seat cowl, tire hugger
    -Twisted Design= tidy tail kit
    -ASV= levers
    -quickshifter (no manufacture)= FUN
    -T-Rex= frame sliders/ case protection
    -JT Sprocket=JT Sprockets JTR1490.43 - steel
    -wave rotor=BL02FID
    -Ohlins- steering damper(model#SD000) bushing kit# a14010200ux0631
    -K&N= oil filter part # KN-564
    -Screensforbikes.com= 1190rx wind screens tall and short.
    -keyless gas cap= post 38 on this thread for link (EBRRider)
    -Updated chain slider= part #G0012.1B7A
    -Barnett= clutch springs frictions and steels... look up Buell 1125 parts
    -NCCR= online store front for parts. Has OEM and aftermarket parts
    -Spark plug= NGK Spark Plug CR9EKB
    -metal mesh oil filter=http://kandpengineering.com/product-catalog/s27/
    - Supersprox= sprocket kits
    -BuellTooth= quick shifter and dongle
    -St Paul harley= random parts EBR and Buell

    • CRG - RC2 Brake and Clutch levers for 2005 zx6r Part # 2RN-511-T-B
    • Techspec - Tank Pads
    • Liquid Performance eBay page - LAP's online discount part sales
    • Öhlins - BU-888 is the 1125/RS rear shock, a drop-in part to the 1190RX/SX, a note though: these were all built in 2011 or earlier. If you purchase one, you'll have to have it serviced/rebuilt before you fit it to your bike or the seals will fail very quickly.
    • Woodcraft - replacement/upgraded clip ons, replacement solid foot pegs, hand guards
    • Shorai - Makers of the battery, battery cable, battery charger
    • McMaster-Carr for Washers and O-Rings
    • M18 Oil Drain Plug LH Washer - Equivalent to EBCF0092.1B6 - https://www.mcmaster.com/#97725a860/=1bnm6de
    • M12 Oil Drain Plug RH Washer - Equivalent to EBCF0091.1B6 - https://www.mcmaster.com/#97725a250/=1bnm6vb
    • Oil Filter Cover O-Ring - Equivalent to EBCF0003.1B6 - https://www.mcmaster.com/#9452k147/=1bnm7hx



    gdisaac07 hooked this list up... i will stay in touch with him for links and such.. thanks bud for the clean up

    • OEM Parts Supply
      EBR Parts Supply - http://www.erikbuellracing.net/store/
      • Updated chain slider (Part # G0012.1B7A)

      LAP eBay page, Liquid Performance - https://www.ebay.com/sch/liquid_performance/
      Aftermarket Dealers
      AF1 (Our Forum Sponsor) -
      NCCR (Official European EBR parts supplier, plus other aftermarket parts) -
      St. Paul Harley Davidson - https://sphdonline.com/
      Bodywork
      Bestem USA

      • Carbon fiber replacement parts -

      Hotbodies Racing


      PowerBronze

      • Seat cowl and tire hugger -

      Screensforbikes.com

      • 1190RX windscreen, short and tall -

      Slingshot Racing


      Twisted Designs

      • Tail Tidy Kit -

      Seat
      Stitch Wilson


      Rider InterfaceABM

      • Clutch Lever (Part # ) -
      • Brake Lever (Part # ) -

      ASV

      • Clutch Lever (Part # ) -
      • Brake Lever (Part # ) -

      CRG

      • Clutch Lever (RC2 for 2008 Kawasaki ZX-14, Part # , Shorty and other colors available too) -
      • Brake Lever (RC2 for 2005 Kawasaki ZX-6R, Part # 2RN-511-T-B, Shorty and other colors available too) -

      Knight Design

      • Pegs

      Motion Pro

      • Adjustable throttle (Rev 2.1 Throttle tube, Part # ) -

      Vortex

      • Pegs -

      Woodcraft

      • Clip ons/bars (Part # ) -
      • Solid foot pegs (Part # ) -
      • Hand guards(Part # ) -

      Protection
      5-0Dro

      • Swingarm and fork protection -

      GB Racing

      • Engine Case Protection -

      R&G

      • Frame sliders, cooler grills, assorted tidbits -

      T-Rex

      • Frame sliders, engine sliders, axle slider

      Techspec

      • Tank Pads (Part # ) -

      Exhaust
      APH

      • Exhaust -

      Dean Adams

      • Round can or oval can exhaust, including ECU (either the one with the map exclusively for the type you buy, or a tunable ECU) -
      • Various other tools -

      HMF

      • Exhaust -

      Engine
      Barnett

      • Clutch springs (Part # , required if you're using a new exhausting and putting down more power than stock) -
      • Clutch packs (Part # , this is the 1125 carbon fiber clutch pack) -

      L.A. Sleeve

      • Upgraded cylinder sleeves

      NGK

      • Spark Plug (Part # CR9EKB) -

      Electronics
      BUELLTooth

      • Quickshifter, regular shift pattern -
      • Quickshifter, GP shift pattern -

      IDS

      • Original designer of the ECU, sells ECU's with other tunes, plus a user-tunable one -

      Shorai

      • OEM Lithium Battery (Part # LFX21A7-BS17) -
      • Battery Charger (Part # SHO-BMS01) -
      • Battery Cable (Part # ) -


      Woodcraft

      • Ignition bypass (Part # ) -

      Sprockets
      JT Sprocket

      • Steel, 43 tooth, Part # JTR1490.43 -
      • Steel, 44 tooth, Part # JTR1490.44 -

      Supersprox

      • Steel/Aluminum engineered sprockets -

      Vortex

      • Aluminum, 43 tooth, Part # Vortex-821-43 -
      • Aluminum, 44 tooth, Part # Vortex-821-44 -

      Suspension
      Öhlins

      • Front Fork Cartridge Kit (Call Seacoast Sport Cycle for NIX30 kit, installed for $1,750 + Shipping) -
      • Rear Shock (Part # BU-888 is the 1125/RS rear shock, a drop-in part to the 1190RX/SX. A note though: these were all built in 2011 or earlier. If you purchase one, you'll have to have it serviced/rebuilt before you fit it to your bike or the seals may fail very quickly) -
      • Steering Damper (Part # SD000, requires bushing kit Part # A14010200UX0631) -

      Showa

      • Stock Big Piston Forks and Shock -
      • Race Shock -

      Wilbers

      • Race Shock -

      Brakes
      Diesel Moto

      • Front Rotor -

      EBC

      • Brake Pads -

      SBS

      • Dual Sinter Front Brake Pads (Part # 856DS) -

      Wave Rotor

      • Front Rotor, Part # BL02FID

      Fluids and Filters
      YOU MUST USE 10W-40 SYNTHETIC ENGINE OIL IF YOU PLAN ON RIDING AT ANY TIME WHEN IT IS LESS THAN 40 DEGREES FAHRENHEIT. OTHERWISE, USE 20W-50 SYNTHETIC.
      AMSOIL (EBR recommends that you use AMSOIL)

      • 10W-40 Oil (Part # MCF+QT-EA) -
      • 20W-50 Oil (Part # MCVQT-EA) -

      HIFLO

      • Oil Filter (Part # ) -

      K&N

      • Oil Filter (Part # KN-564) -

      K&P Engineering


      McMaster-Carr


      Mobil 1

      • 10W-40 Oil -
      • 20W-50 Oil -

      Royal Purple

      • 10W-40 Oil -
      • 20W-50 Oil -

      Spools/Stands/Restraints
      Driven Racing

      • Spools -

      Pit Bull

      • Spools (6mm, Delrin only) -
      • Rear pit stand (Wide stand) -
      • Front pit headlift stand (Pin #1) -
      • Trailer Restraint System (Part # ) -




    i will try to keep the list up to date
    please help out with it if you can thanks....
    Last edited by MakingPAIN; 03-26-2018 at 10:49 AM. Reason: update

  2. #2
    EBRforum Expert
    Join Date
    Sep 2012
    Location
    Salters, SC
    Posts
    898
    Knight Design makes the footpegs that were used on the Black Lightning prototypes:

    1" drop foot pegs, black, Sidetrax tread for Buell Black Lightning
    PN# 101410-1110 $129.99 a pair, 1" drop compared to stock pegs.

    http://www.knightdesignllc.com/index.htm

  3. #3
    EBRforum Novice
    Join Date
    Apr 2015
    Location
    Florida
    Posts
    106
    Looks like our lead BASTARD is on the job.

  4. #4
    EBRforum Junkie MakingPAIN's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix AZ
    Posts
    300
    Lmao that was a good one right there!!!

  5. #5
    EBRforum Novice
    Join Date
    Jul 2017
    Location
    aus
    Posts
    123
    Cheers for the list

  6. #6
    EBRforum Expert Cooter's Avatar
    Join Date
    Apr 2017
    Location
    In your basement
    Posts
    782
    Oh lord.... haha

  7. #7
    EBRforum Expert EBRRider's Avatar
    Join Date
    Feb 2017
    Location
    Calif
    Posts
    828
    Quote Originally Posted by MakingPAIN View Post
    So i have been looking around for parts suppliers and i thought it would be a good idea for everyone to get together and post up everyone they can think of that currently sells EBR parts

    -Hotbodies racing= race body work
    -R@G= frame sliders, grills for coolers, small tidbits
    -5-0dro= swing arm and fork protection
    -Driven racing= spools
    -Dean Adams= exhaust
    -APH= exhaust
    -IDSPD= ECM
    -sTITCH WILSON =seats
    -Diesel moto= rotors
    -Vortex= sprockets and pegs
    -Amsoil= you know why
    -HMF= exhaust
    -EBC= brake pads
    -HIFLO= oil filters
    -Knight Design= lower foot pegs
    -Bestem USA= carbon body work
    -ABM=Clutch and brake levers
    -GB Racing= crash protection for engine cases
    -Motion Pro= throttle set up and cables
    -Wilbers= shocks
    -Showa= shocks
    -PowerBronze= seat cowl, tire hugger
    -Twisted Design= tidy tail kit

    i will try to keep the list up to date
    please help out with it if you can thanks....
    ASV Shorty = levers
    Quick shifter = FUN !
    Last edited by EBRRider; 07-23-2017 at 06:41 PM.

  8. #8
    EBRforum Newb
    Join Date
    Jul 2017
    Location
    Montana
    Posts
    16
    Damn, I already made the list! Thanks :) my site is customcycleseats.com, for those folks not on fb.

  9. #9
    EBRforum Junkie MakingPAIN's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix AZ
    Posts
    300
    Stitch your the most important supplier!!!!!! you keep our azz on our bikes, no one likes a raw butt after riding

  10. #10
    EBRforum ProvNov yzf29's Avatar
    Join Date
    Oct 2013
    Location
    near ATX
    Posts
    55
    Thanks for putting this list together!

Similar Threads

  1. Aftermarket Seat
    By squidvicious in forum 1190SX
    Replies: 36
    Last Post: 08-20-2017, 09:05 AM
  2. EBR 1190RX/SX Aftermarket Parts (Brand New)
    By Vipertestarossa in forum EBR / Buell Wanted or For Sale -- Parts
    Replies: 5
    Last Post: 05-25-2016, 07:41 PM
  3. parts still left in stock at Parts Unlimited
    By Ed / AF1 Racing in forum EBR News and Discussion
    Replies: 6
    Last Post: 01-15-2016, 02:58 PM
  4. Found supplier of all aftermarket ebr parts!!!
    By ebr1190rxyellow in forum 1190RX
    Replies: 5
    Last Post: 05-29-2015, 10:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •